CNP

Hendlex airplane ceramic coating CNP is manufactured for plastic aviation canopies that improve vision in every air condition providing minor resistance to the wind and repelling raindrops. Because of these properties, vision conditions are significantly improved. The CNP airplane coating is long-lasting and does not need to be used frequently.

CNP nano-ceramic coating does not crack in the air, even with high airplane body vibration.  This airplane coating is sturdy and durable, safe to use and has no side effects for the airplane. Also, it removes holograms and minor scratches.

ОПАКОВАНО В ИНЕРТНА ГАЗОВА СРЕДА. Гарантирана 100% ефективност.

Код: CNP40
Имоти
  • Less rain drops during the rain;
  • Renews surface;
  • По-малко триене на въздуха;
  • Easy bugs removal;
  • По-малко холограми и малки драскотини;
  • Дълготраен;
  • Покритието е устойчиво на температури от -30°C до +150°C.

СПЕЦИФИКАЦИЯ НА ПРОДУКТА

СПЕЦИФИКАЦИЯ НА ПРОДУКТА

ПОДГОТОВКА НА ПОВЪРХНОСТТА

Adequately prepare the surface before application of Hendlex CNP. Guidelines to follow to ensure the effectiveness of the product:

  • Повърхността трябва да бъде старателно измита, почистена от мазнини, замърсявания и остатъци.
  • Предишни покрития или восъци трябва да бъдат отстранени. Препоръчва се Hendlex Wax Remover.
  • Силно се препоръчва полиране на повърхността, за да се премахнат евентуални драскотини, вихрушки или холограми.
  • Уверете се, че повърхността е напълно суха.

Забележка: За най-добри резултати се препоръчва да използвате Hendlex Paint Prepare преди нанасяне на покритието.

УПОТРЕБА

1. Open the bottle and wet the application cloth entirely. Throughout the process of coating, keep the application cloth wet by applying additional 5-6 drops.

2. Coat the surface evenly in criss-cross motion. Do not use circular movements for product coating. Make sure there are no uncovered spots left.

3. След нанасяне на покритието, изчакайте:

– if temperature is lower than +24 °C – 30 seconds;

– if temperature is higher than +24 °C – 20 seconds;

– не нанасяйте слой, ако температурата е по-висока от +30°C.

4. Полирайте повърхността с висококачествена микрофибърна кърпа. Уверете се, че няма останали неполирани петна.

5. Избършете покритата зона с чиста част от микрофибърната кърпа за перфектен завършек.

6. Препоръчителен период на втвърдяване на покритието:

– ако температурата е над +20°C – първоначално 12 часа;

– ако температурата е под +20°C – първоначално 24 часа.

Do not wash the airplane canopy for at least 7 days. Depending on the environment temperature, the coating fully hardens in 7 days.

ВНИМАНИЕ!

Не нанасяйте покритието върху матови повърхности или на пряка слънчева светлина.

Подходящ температурен диапазон за приложение: от +10 °C до +25 °C.

Не нанасяйте слой, ако температурата е по-висока от +30°C.

След като приключите с нанасянето на покритието, полирайте го с микрофибърна кърпа.

Уверете се, че няма останали неполирани места.

Adhesive tape does not stick on the coated surface. Do not coat Hendlex CNP ceramic coating on the surface where adhesive tape will be applied.

Намерете още продукти за авиацията тук / Ако имате някакви въпроси относно продукта, моля свържете се с нас

Hendlex airplane ceramic coating CNP is manufactured for plastic aviation canopies that improve vision in every air condition providing minor resistance to the wind and repelling raindrops. Because of these properties, vision conditions are significantly improved. The CNP airplane coating is long-lasting and does not need to be used frequently.

CNP nano-ceramic coating does not crack in the air, even with high airplane body vibration.  This airplane coating is sturdy and durable, safe to use and has no side effects for the airplane. Also, it removes holograms and minor scratches.

ОПАКОВАНО В ИНЕРТНА ГАЗОВА СРЕДА. Гарантирана 100% ефективност.

Последвайте ни
bg_BGBG